• POWERFUL DRIVE
    FOR EXACTING
    REQUIREMENTS

over 70 years of Farymann diesel engines
  • 15 W / 18 W

    Technical information

    Single cylinder four stroke diesel engine, water cooled with direct injection system, save manual start with starting handle or electric starter motor, excess fuel device, automatic decompression, self-venting fuel system, mechanical governor, lubricating oil gear pump, dry type air cleaner or oil bath air cleaner, fuel filter, exhaust silencer or water cooled exhaust elbow, crankcase of high tensile light alloy, crankshaft / con rod bearing: plain bearings on all except flywheel end (roller bearing), cast integral engine feet, power take of flywheel end, environmentally friendly by using internal crankcase breathing and valve stem seals. The engine is also available in air cooled version as 15 D / 18 D.

    Standard scope of supply

    Oil bath air cleaner, fuel filter, fuel lift pump, cooling water pump, exhaust silencer, operator`s manual.

    Accessories

    Dry type air cleaner, water cooled exhaust elbow, electric starter motor, alternator, solenoid valve, oil pressure switch, anti-kickback starting handles, different flywheel housings, flanges and couplings, EPA-certificate.

    IFN-ISO

    Blocked power output for intermittent loads.

    ICFN-ISO

    Standard rating for constant speed level and constant load level. For applications with continuous operation beyond the limits please contact the manufacturer.

    Derating

    Derating 1% approx. every 100 m altitude and 2% approx. every 5°C above 20°C. Ratings certified within tolerance of 5% after running-in and operation with muffler and standard air cleaner.

    Engine type   15 W
    Configuration   vertical
    Cylinders   1
    Cooling   water
    Max. output (at 3600 rpm)

    IFN-ISO

    ICFN-ISO


    kW (HP)

    kW (HP)
     

    4.3 (5.9)

    3.9 (5.3)
    Max. speed

    Max. torque
    min-1

    Nm (min-1)
    3600

    13.0 (2500)
    Bore

    Stroke
    mm

    mm
    82

    55
    Displacement cm3 290
    Mean piston speed m/s 6.6 / 3600
    Compression ratio   20:1
    Oil sump capacity l 1
    Oil consumption g/kWh 1
    Max. inclination permanent 15°
    Dry weight kg 39
    Cooling water requirement l/min 7 - 8
    Engine type   18 W
    Configuration   vertical
    Cylinders   1
    Cooling   water
    Max. output (at 3600 rpm)

    IFN-ISO

    ICFN-ISO


    kW (HP)

    kW (HP)
     

    5.2 (7.1)

    4.7 (6.4)
    Max. speed

    Max. torque
    min-1

    Nm (min-1)
    3600

    15.3 (2500)
    Bore

    Stroke
    mm

    mm
    82

    55
    Displacement cm3 290
    Mean piston speed m/s 6.6 / 3600
    Compression ratio   20:1
    Oil sump capacity l 1
    Oil consumption g/kWh 1
    Max. inclination permanent 15°
    Dry weight kg 39
    Cooling water requirement l/min 7 - 8
© 2015 Farymann Diesel Engines GmbH